Gas Cooled & Water Cooled Torches How do I know when to choose a Gas/Air Cooled TIG
Torch vs. a Water Cooled TIG Torch?
Max-Flo Technology - Why are CK water cooled TIG torches cooler? Max-Flo technology provides maximum flow around the
TIG Torch head to provide the best cooling. CK's Max-Flow system
provides up to 4x the surface area for maximum heat transfer.
Wedge Collet
vs. Split Collets Wedge Collets last 10x longer than standard split
collets, improves arc starts and arc stability and fits any standard
collet body or gas lens collet body
Gas Saver -
Save up to 40% on Argon CK exclusive Gas Saver consumables provide better gas
coverage than standard consumables, are less expensive than standard gas
lenses and are available for use with clear Pyrex glass nozzle.
Large Diameter Gas
Saver - For Titanium TIG welding The Large Diameter Gas Saver front end offers the
largest interchangeable front end available (1 1/8" diameter) on the
market for TIG welding thin gauge refractory alloys like Titanium. Trail
Cups are also available that clip to the nozzle as a secondary source of
Argon for welding Titanium outside a welding enclosure (see CK
Inflatable Purge Chamber).
Super Flex Cables Superflex TIG hoses are 10x more flexible than
conventional vinyl plastic or traditional rubber hoses. Superflex hoses
are available for Gas/Air Cooled and Water Cooled TIG torches. Superflex
hoses are COLOR coded for easy installation.
Cold Wire Feed
System - Increase productivity by up to 30% Use spooled MIG wire for TIG Welding by hand!
Increase " arc on" time by 30%. Eliminate cut lengths of wire. Minimize
starts and stops. Hand Pendant or Torch Mounted. Best when used for "in
position" hand held TIG welding. Set up video also available on-line.
Demo's available
Amperage
Controls - Linear, Wheeled and Rotary Works just like a foot pedal in your hand! Designed
to be used where a foot pedal isn't possible.
3 proprietary designs available to fit most TIG power sources on the
market. Linear, Rotary or Wheel models available. Velcro straps, clipper
or built in handle options
Micro Torch
This is the smallest TIG Torch made by CK Worldwide. The
head is about the size of a dime. It is designed for difficult to access
and previously impossible to reach spots and to make short emergency and
repair welds.
70A Gas/Air Cooled or 140A Water Cooled. Custom lengths available.
Trimline Torch
- Low profile high amperage torches The TL26 has a much smaller handle than a traditional
CK26 or competitive 26 style TIG Torch without sacrificing the same
amperage rating (Gas/Air Cooled 200A @ 100% duty cycle). Also available
is a TL18. (Water Cooled 350A @ 100% duty cycle).
CK510 Torch - 500
Amp heavy duty TIG torch Rated at 500A @ 100% duty cycle the CK510 can be used
with Tungsten diameters from .020- 1/4" and is no larger than a
traditional 18 style TIG Torch. Standard or Heavy duty consumables are
available.
Safe-Loc -
Quick TIG to Stick and Euro Dinse Connectors Tweco style allows quick and safe disconnect from TIG
to Stick Welding or for extending leads economically beyond 25' of the
power supply. Dinse style provides direct hook up to Inverter type power
sources.
Flex-Loc Torch -
360° Variable angle TIG torch head Flex-Loc Gas Cooled and Water Cooled TIG Torches
locks into any position. Designed by a TIG Pipe Welder for TIG Pipe
Welding. Great for "walking the cup" on open root welds.
Fuse Block
Adapter - In-line fuse to protect water cooled power cables A replaceable fuse link blows when water flow is
interrupted to the TIG Torch saving the replacement cost and mess of
needing a new power cable. 5 replaceable fuses included. Cost is equal
to the cost of one replacement power cable.
17 & 17V Style TIG Torch with Thread on Handle Threaded handle is great for "walking the cup" since
the handle won't move even after the TIG Torch heats up. Available in
valved or non-valved. Rigid Head only.
Exclusive Distributor in Mexico
en Español Introducing CK's exclusive distributor in Mexico
